ACL3is - Anti Collision Light for Fuselage or Tailplane Fin Assembling
The well-proven Thiesen ACL3 has been further developed, and is now also able to be integrated into the new intelligent synchronization systems.
Like the ACL I, the ACL3is is also made of a high-optic and scratch-resistant plastic module.
By use of newest LED technology and better manufacturing technique, we where
able to reduce the production costs of our ACL3is. This latest technology
ensures more luminosity.
As against the conventional ACL the ACL3is emits approx. 100% more light while consuming the same power input.
The entire control element is integrated into the ACL module where the ACL's dimensions determine the required space.
The extremely bright, red sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.
The light is prewired to allow easy connection to a 3-lead cable of minimum 1.5 mm² cross section. Flanges allow simple fixture. In addition, it can be affixed to the fuselage or rudders by means of a silicone adhesive. An instructions manual and the shrink tubing required for the assembly are included in the ACL package.
The integration of our well proven Intelligent Synchronization allowes a chronological sequence of power consumption for the connected anti collision lights and prevents battery and generator from becoming overloaded.
|Operating voltage||10 - 17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)|
|Wattage||approx. 20 watts|
|Fuse||5 Ampère (fusible cut-out or automatic fuse)|
|Dimensions||61 x 46 x 52 mm (L x W x H)|
|Drill hole||4.5 mm|
|Weight||approx. 110 g incl. connecting cables|
|Warranty||5,000 operating hours or max. 3 years|